|
|
 |
|
Please Be Sure that ALL Wax and Fragrance Are calculated by Measured WEIGHT and
Not Volume..... if you do not measure your weights all in the same method you will Mess up your candles..... Example,
if you are using 5 pounds of Wax, BY WEIGHT, and you want to use 1 oz. per pound, you should then use 5 oz. of fragrance.....
if you measure the wax by Cups, you will have no Idea how to figure the Fragrance in cups...... If you have any questions
PLEASE let us know........
|
|
|
| Single Pour Container Blend Wax |
|
| Perfect For Containers |
Our Single Pour Container Blend
Wax has been Formulated for Use in Container Candles..... The Melt Point is 126, and the fragrance load is suggested at a
max of 12%. Our Wax is FDA Approved and is safe for use in Paraffin baths as well for Salon Use....
Directions - Heat Wax using a Double Boiler Method, or in a Fry Daddy Warmer to 180 Deg.
You can add your color at any time during the heating process. Once your wax has reached 180 Deg. Remove from the heat and
blend in your fragrance. We Suggest you blend your fragrance at least a minute to a minute and a half to be sure
your fragrance is blended evenly..... If you are pouring Jar Candles you will not require a re-fill.
Once your candle is dry you will have a Very smooth, Creamy looking candle and will burn Super Clean and Super Strong....
If you have any questions on the Process of using this wax, Please let us know..... We Only use this
wax to Make All of our Jar Candles... Our customers Demand the strongest and best burning candles, so we had made
for us the best, and strongest burning wax we think you will find anywhere..... Clean up is also easy, place your pouring
picture back into the pan of warm water and wipe with a paper towel....... We hope you enjoy making your candles
just as much as we do.....
|
|
|
| Tart Blend Pellets |
|
| Tart Blend to make Tarts, or Scent Trays |
Our Tart Blend Wax is designed to make tarts and Scent Trays with
a melt point of 130 deg. and a fragrance load rating of 10% max. This wax does not require any additives to use.
Directions - Heat Wax in a double Boiler method, or in a fry daddy warmer to 175 deg., you can
add your color at any time during the heating process. Once Wax Reaches 175 Deg. remove from the heat, be sure color
is fully blended, Add your fragrance, Stir for about a minute and a half, then pour.... once poured your Tarts
or Scent Trays will not require a re-fill and will have a nice smooth finish to it........ If you have any
questions during the pouring process, Please let us know...... to clean your pot out, Please set back into
your warm water and wipe with paper towels.......
|
|
|
|
|
|
|
|
|
|
~ Single Pour Container Blend Wax ~ Melt Point - 126, Pour Temp - 170-180 Fragrance Load Rating - 12.0% Max. No Additives Needed ~ Tart Blend Wax ~ Melt Point - 130, Pour Temp. 160-175 Fragrance Load
Rating - 10% Max. No Additives
Needed ~ Votive/Pillar Wax ~ Melt Point - 140, Pour Temp. 175-180 Fragrance
Load Rating - 6 - 8% MUST
USE ADDITIVES
The Candle Source * 912-B Water Tower Lane, West Carrollton, Ohio
* 45449 Phone: (937) 298-1723
|
|
|
|